![]() To access it again You must be connected to the VPN Server. Note: After the reboot, there will be no connection to the server outside the VPN. That’s all to configure on the server and the router sides. Initial setup of the MikroTik is done, now proceed with the server configuration:ġ0. After finish creating profiles, review the settings Add another profile as the above for the client connection as shown in the picture.ĩ. Click OK to apply and save the new profile.Ĩ.On Remote address enter: 10.0.0.2 (this will be the address that server will use for all communications).On Local address enter: 10.0.0.1 (this will be the default Gateway of the server).On password, set a strong, non-dictionary password (may use ).On Name, define the username of the server. ![]() Go to “Secrets” tab and click Add “+” buttonħ. Click - PPTP Server button and check “Enabled” box and “chap” as authentication methodĦ. Connect to the CHR using WinBox and set username and password as soon as possible! (You can download WinBox from HERE)ĥ. The client’s computer also connects to the VPN over PPTP, and gains access to the server’s resources.Īll connections are managed on the CHR and could be filtered very tightly to rise the security level.ģ. Default GW on the server is changed to be served by the VPN over the tunnel. The server connects to the VPN server over PPTP and the new tunnel will be used to route all the traffic to and from the server. It has local connectivity to Debian VPS, which is completely secure due to the cloud environment. Topic: Windows Client establish secure connection to Debian server over VPN, managed by MikroTik CHRĭescription: CHR will serve as firewall and VPN concentrator. This guide will describe one of the many possible usages of MikroTik CHR and Virtual Private Server (VPS). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |